Know how much AC leakage to ground or between coils in your components,
not just that it is leaking. Test the way OEM does.
Crystal Lake, IL 60014
800-662-6099
815-459-0355
Fax:
815-459-0442
 |
 |
 |
| M151-GFA Ground Fault Analyzer |
| Specifications: Dimensions: 11” x 11” x 4 1/2” Shipping Wght: 18 lbs. Power: 110V, 60Hz |
| • Test
rotors, stators, armatures, insulators, brush holders, field coils,
field cases, ungrounded solenoids and solenoid coils. • Get audio and visual indication of the amount of leakage at 50, 250, and 500 Volts AC. (1000 VAC optional) • Get audio and visual indication on arcing. A buzzer will buzz (pulsating buzzer). The leakage led will flash rapidly. • Test cycle time per test voltage per individual contact: 50 VAC no time limit, 250 VAC five seconds off then auto off, 500 VAC five seconds on then auto off, 1000 VAC (optional) one second on then auto off. • High voltage safety test probes and foot switch protect operator. • Once the voltage and level of leakage are selected, a beeper will indicate any excess leakage thus eliminating the need to look at the tester to know the condition of the part being tested. • Indicate moisture grounds so you can correct them. Features: • Microprocessor controlled so calibration is not necessary. The machine will self test all circuits in less then 5 seconds. • 10 LED’s indicate leakage in 1ma stages of leakage at 50, 250 & 500 VAC, (1000 VAC optional) Component Functions: 1 Red LED’s numbered from 1 to 10 indicate in 1 ma increments the amount of AC voltage leakage and produces an audible sound based on beeper setting. If arcing occurs leakage led’s will flash rapidly and a different sounding buzzer will buzz. 2 Buzzer set switch sets the level of acceptable leakage 1 to 10 ma. Example: if the switch is set on 4 and 5 LED’s light and the buzzer will go off indicating excess leakage. 3 Voltage set switch allow you to set the operational voltage of the test, 50, 250 & 500 VAC, (1000 VAC optional) 4 Foot switch applies AC power to the test probes 5 Test Probes provide a safe means of connecting to the component under test 6 AC power switch with light. Options: M151-GFA-220 220V, 50Hz version M151-GFA-1 1000 Volt Conversion |