•    Test rotors, stators, armatures, insulators, brushholders, field coils, field cases, ungrounded solenoids and solenoid coils.
•    Get audio and visual indication of the amount of leakage at 50, 250, and 500 Volts AC.  (1000 VAC optional)
•    Get audio and visual indication on arcing.  A buzzer will buzz (pulsating buzzer).  The leakage led will flash rapidly.
•    Test cycle time per test voltage per individual contact:  50 VAC no time limit, 250 VAC five seconds off then auto off, 500 VAC five seconds on then auto off, 1000 VAC (optional) one second on then auto off.
•    High voltage safety test probes and foot switch protect operator.
•    Once the voltage and level of leakage are selected, a beeper will indicate any excess leakage thus eliminating the need to look at the tester to know the condition of the part being tested.
•    Indicate moisture grounds so you can correct them.

Specifications:
Dimensions:    11” x 11” x 4 1/2”
Shipping Wght:    18 lbs.
Power:        110V, 60Hz