Previous Page
 Next Page
Testing Index On-Line Catalog
VENSEL ENTERPRISES
1-800-662-6099
Catalog - Page 9
M151-06-6500
M151-06-6500-110
HIGH POWER DIODE TYPE IDENTIFIER
 AND COMPONENT ANALYZER

This automated tester will do all necessary tests by itself to identify the component and display all the test results at the same time.
Features:
•    You never need to reverse the probes, to get the results
•    You don’t need to know the polarity of the diode.
•    You don’t even have to know if it has an avalanche or standard diode.

Developing Your Standard For All Your Diodes:  IF YOUR STANDARDS ARE AS GOOD AS OR BETTER THAN OEM...BE ABLE TO PROVE IT.
 
Use OEM or aftermarket diodes to get the readings of:
VF (Forward Voltage Junction Drop) @ 1 or 65 Amps - Will display 0-2.55V
Leakage Current...200Volts - Will display uA (microamps) 0-1000uA
Avalanche Voltage Range - Will display 12.0-40.0V

Specifications:
Diode Voltage Drop (VF):  0-2.55V
Leakage Voltage Test:  200V
Leakage Current:  0-1000 uA
Test Current:  1A or 65A
Avalanche Voltage:  12.0-40.0V
Power:  M151-06-6500-110 = 120V, 10VA, 1A, 60Hz, Optional: M151-06-6500-220 = 220V, 10VA, 0.5A 50Hz
Size:  10” x 10” x 4”
Weight:  10 lbs.
Warranty:  1 year parts and labor
Display Parameters
 Meaning
No Diode Detected (open)
 Nothing is connected or the diode is open
Short is Detected
 The probes are touching together or the     diode is shorted.
Testing VF @:  1A
 Diode test is done with 1A
Testing VF @:  65A
 Diode test is done with 65A
Polarity:  Positive
 It is a positive diode
Polarity:  Negative
 It is a negative diode
Voltage:  XX.X
 Avalanche voltage set point
Voltage:  XX.X
 Diodes Voltage Drop
Leakage:  XXXXX
 Leakage current at micro amps
Type:  Rectifier   
The diode is a standard diode
Type:  Avalanche
 The diode is an avalanche diode
D201-0065-CDT
D201-0065-CDT
DIODE TESTER

•    Measured Parameters:   
        Diode Forward Voltage Drop
        Reverse Break over Voltage
        Reverse Leakage Current
•    Programmable limits for diode trio, rectifiers and avalanche diodes
•    Check Rectifier with stator connected
•    Automatic selection of polarity
•    GOOD/BAD diode indication
•    HIGH/LOW indication for every measured parameter
•    Sound indication of polarity and GOOD/BAD diode
•    Automatic selection of leakage current test voltage
•    OPEN/SHORT/DIODE indication
•    Self diagnostic and calibration
D201-0065-CDTA is a microprocessor diode tester designed to provide the rebuilder with a quick, accurate and easy to use device to check and measure all main parameters of regular and avalanche rectifiers.  During the check measured values are compared with preset limits and GOOD/BAD indication is switched ON or OFF, according to the results.  The readings can be taken even with the stator attached to the rectifier.  Sound indication is available too.  The tester can detect the direction of the diode and automatically reverse the test probes to provide proper measurement.  The limits are fully programmable by the operator.  The tester can store specifications for all popular rectifiers. 

Technical Parameters
Measured Parameters and Ranges:
    Diode Forward Voltage Drop    0-2.55V
    Reverse Break over Voltage    0-100V (0-200V optional)
    Reverse Leakage Current    0-1000uA (1mA)

Measuring Accuracy:
    Diode Voltage Drop        1% +/- 0.002V
    Break over Voltage        1% +/- 0.1V
    Leakage Current        1% +/- 1uA (o.001mA)

Measuring speed        3-4 measures/second
Test Current        65 Amps
Power supply        120/220V AC, 10VA
Leakage Current is tested @ 20, 50 and 100 Volts, automatically selected depending on the Break over Voltage
Previous Page Next Page
Testing Index On-Line Catalog
VENSEL ENTERPRISES
1-800-662-6099
Catalog - Page 9