Previous Page
 Next Page
Testing Index On-Line Catalog
VENSEL ENTERPRISES
1-800-662-6099
Catalog - Page 40
K101-0150-KD
K101-0150-KD-1 Single Speed
Alternator & Starter Tester

This tester is designed to function in a multitude of applications from auto parts jobbers and salvage yards to vocation and instructional institutions.  It tests both running alternators and starters with the same accuracy and performance you would expect to find in more expensive testers.
  • Digital volt and ammeter
  • Test selector seitch for starter or alternator test position
  • Uses a 12 volt battery (not included) continuously, recharged during alternator testing.  (GM alternators above 1986 require battery for testing).
  • Duplicates the circuitry found in an automobile
  • Switch activates load for testing alternators.  Dual load pre-set at 40 and 80 amps
  • Indicator light for IC alternators
  • Field circuit portection-10 amp. fuse breaker, push to reset
  • A minus and B plus field circuits.
  • Full field switch
  • Tests all American alternators, starters; tests all foreign made with additional harness leads
  • 10 test leads for late model alternators included
  • 2 step pulley (3" and serpentine).
  • Testing of 6, 12, 24, 32 volts (optional)
  • 5HP, Single Phase motor
  • 230 volt, 60 Hz motor.
  • Dimensions: 18" wide x 21 " high x 24" deep
  • Shipping Weight:  100 lbs.
K101-0351-K
K101-0351-K
K101-0351-KV
K101-0351-KV

K101-0351-K Series

Alternator, Generator & Starter Testers

General Specifications (see down for specific features for each model)
  • Two, 4-1/2" meters: Voltmeter, 0-18-0-36 for testing operating voltage. D.C. ammeter dual scale 10-0-100/120 amp for testing alternators and 30-300 amp for testing free running starters.
  • One 3" D.C. ammeter 10-0-10 for testing field current.
  • Duplicates the circuitry found in an automobile.
  • Tests 6-12-24 volt.
  • A or B circuit.
  • Motor reverse switch.
  • Heavy duty field rheostat, controls alternator and generator output.
  • Field circuit protection-10 amp fuse breaker, push to reset.
  • Indicator light for testing Delcotron and other units using diode trios
  • External voltmeter switch for checking alternator and regulator tabs.
  • Heavy duty mounting vise. Enables fast mounting and removal.
  • Three step pulley (3", 4", & serpentine) for low and high speed operation.
  • Variable load control. High 80 amps, low 40 amps.
  • Shipping weight: 200 lbs.
  • Dimensions: 24" wide x 22-1/2" high x 32" deep.

    • Model K101-0351-KV Specifications: (See up for general specifications for the 300 Series)

  • D.C. ammeter dual scale 15-0-150 amp for testing alternators and 30-0-300 amp for testing free running starters.
  • R.P.M meter 0-7000 R.P.M
  • Electronic speed control.
  • Three preset loads of 40, 80, and 120 amps.
  • Universal harness adapter. (with the 27 most commonly used test leads.)

    • K101-0351-KT

    Designed for truck application for testing alternators, generators and starters.

    Helps to eliminated excess replacement component cost.

  • Test alternators up to 160 amps
  • 5 HP, 230 VAC 1 or 3 Pz
  • Digital voltmeter and ammeter
  • 3" DC ammeter 10-0-10 for testing field current
  • Test 6, 12, 24, or 32 VDC. Battery required (Not included)
  • Duplicates the circuitry found in vehicle
  • A/- or B/+ circuit
  • Motor reversing switch
  • H.D. field rheostat controls alternator and generator output
  • Field circuit protection, 10 amp fuse breaker, push to reset
  • Indicator light for testing I.R. alternators using diode trio
  • External voltmeter switch for checking alternate system voltage
  • Free spin starter test capability
  • Heavy duty mounting vise
  • Three step pulley ( 3", 4" and serpentine)
  • Variable load control; 40, 80, 120 & 160 amps
  • 11 test leads for late models alternators

    • < style="font-family: arial;">OTHER MODEL SPECIFICATIONS
    K101-0351-K-    Designed for heavy duty testing, small to large shops. 5 HP single Phase, 230 volt AC Tests alternators up to 120 amps.
    K101-0351-KD-Same as K351 but with digital meters.
    K101-0351-KV-Same as K351 but with variable speed.
    K101-0353-K-Same as K351 but with 5 HP, 5 HP, 3 Phase motor.
    K101-0373-K-Same as K350 but with 7.5 HP, 3 Phase motor.
    Previous Page Next Page
    Testing Index On-Line Catalog
    		VENSEL ENTERPRISES
    1-800-662-6099
    Catalog - Page 40