| Previous Page |
Next Page |
| Testing Index | On-Line
Catalog |
1-800-662-6099
Catalog - Page 68
COMPUTERIZED STARTER TESTER
• Fully automated precise testing for high volume applications at the touch of a button
• Load test units up to 6.5kW
• Measures more than 40 different starter parameters including free spin current and speed, solenoid current, contact voltage drop, and “R” terminal function
• User configurable Pass and Fail reports and labels with performance curve plotting torque, power, speed and voltage
• Computer controlled programmable 1600 Amp starter power supply with less than 100mV ripple, simulating 200-2000 CCA battery (0-30 milliohms)
• Computer controlled 150 Amp programmable solenoid power supply, solenoid pull-in can be tested at a programmable reduced voltage during the test to insure operation under worst case conditions
• Computer controlled programmable load with stall test function
• Simulates engine starting and tests starter, solenoid, drive, and spring engage and disengage timing, this can reveal faulty components or assembly errors
• Built-in oscilloscope, precise waveform analysis which can detect armature and commutator problems
• Energy generated by the load is recuperated by the starter power supply
• Can scan a full performance curve in less than15 seconds which increases the accuracy by decreasing test result variation caused by temperature change
• Automatic clamps hold starter during test
• Supplied with flat screen color LCD monitor
• Available in many working voltages: (220 to 480V @ 50/60Hz)
• Programmable test cycle time as fast as 15 seconds
• Simulate engine firing with up to 10,000 RPM of the starter
• Endurance test and Calibration modes
• Test data logging with graphical display of test cycle for analysis
Starter current: 0-1600 Amps, 0.15%
Starter voltage: 0-40 Volts. 0.15%
Starter speed: 0-20,000 RPM, 1%
Starter torque: 0-60 NM
Solenoid current: 0-150 Amps, 0.2%
Contact voltage drop: 0-2.5 Volts, 0.2%
Starter efficiency: 0-100%
Starter output power: 0-6.5 kW, 0.5%
Starter input power: 0-20 kW, 0.5%
| Previous Page | Next Page |
| Testing Index | On-Line Catalog |
1-800-662-6099
Catalog - Page 68