| Previous Page |
Next Page |
| Press Index | On-Line
Catalog |
1-800-662-6099
Catalog - Page 105
M152-0067-S
HIGH PRODUCTION HYDRAULIC SOLENOID OPENER &
COIL REMOVER
HIGH PRODUCTION HYDRAULIC SOLENOID OPENER &
COIL REMOVER
• Removes the dimples
• Press off the coil assembly
• One machine tooled to do 3 different style solenoids
• All three mounted together for maximum production
• A simple switch valve controls which tooling will be activated
• Applications: 37MT, 42MT & 40MT old and new style solenoids
Power: 3HP, 220/440V, 60Hz
Production rate: up to 200 per hour
M152-0070
HYDRAULIC SOLENOID SLEEVE EXPANDER
HYDRAULIC SOLENOID SLEEVE EXPANDER
Operation:
1 Place the solenoid over the expandable mandrell
2 Activate the hydraulic control
3 The sleeve is formed back to original
• Expander acts as a sizer & shaper while the cap & the hardware are being installed
• Supplied without tooling
• Tooling available for: 5, 10, 28, 37, 40 & 42MT, PMGR & Imports
Power: 3HP, 220/440V, 3 PH, 60Hz
Production time: as many as 600 per hour
Tooling change time: less than 10 minutes
L352-0085
DEMAGNETIZER WITH 4” FIELD
Size: 8” x 8” x 8”
Power: 6 Amps, 110V
Weight: 35 lb
L352-0115
DEMAGNETIZER WITH 8” FIELD
Size: 8” x 8” x *’
Power: 10 Amps, 110V
Weight: 45 lb
• We recommend demagnetizing all starter drive bodies and pinions before cleaning for maximum quality
• Try this test to see why demagnetizing is important: take some bodies and pinions that are ready for reassembling and wipe them completely with a white cloth. Now inspect the cloth for steel shot that has been magnetically held in place and could cause drive failure.
| Previous Page | Next Page |
| Press Index | On-Line Catalog |
1-800-662-6099
Catalog - Page 105