| Previous Page |
Next Page |
| Press Index | On-Line
Catalog |
1-800-662-6099
Catalog - Page 99
M152-0333
IMPORT SOLENOID CASE EXPANDER
IMPORT SOLENOID CASE EXPANDER
• Opens up the cap end of the solenoid
• Allows proper clearance to reinstall a new solenoid cap
• Please specify application when ordering
Press Required: 3 Ton
 |
 |
M152-0334
IMPORT SOLENOID ROLLER CLOSING FIXTURE ONLY
IMPORT SOLENOID ROLLER CLOSING FIXTURE ONLY
Operation:
1 For lathe mounting (American tool post)
2 Mount the solenoid down in the lath headstock
3 Place cap on
4 Adjust line center to hold cap in place
5 Run lathe
6 Bring in forming tool to roll solenoid body over cap
Production rate: up to 100 per hour
• Lathe not included
• Tool post mounted tooling only
• Use with R107-10002 & R107-10003, see page 203
Requires
live centers with blank point:
R107-0263 2MT or R107-0264 3MT
R107-0263 2MT or R107-0264 3MT
ROUND CAN SOLENOID ROLLER
Function:
Round can solenoid flare roller, straightens out the lip left from removing the cap.
Specifications:
- Reduce your solenoid rebuilding time by 1/3
- Complete cycle time of less than 20 seconds
- Can be operated left or right handed
- Produce a professional looking crimp, no bumps or lumps
- Size 8"W x 12"D x 15"H
- Shipping weight 40 pounds
M152-0032
IMPORT SOLENOID DISASSEMBLY FIXTURE
IMPORT SOLENOID DISASSEMBLY FIXTURE
• Press mounted
• Manually operated fixture clamps the solenoid in special jaws allowing you to press the coil assembly out of the can (breaking the cap)
• Press not included
Press required: 3 Ton
Production time: up to 250 per hour
Tooling change time: less than 3 minutes
| Previous Page | Next Page |
| Press Index | On-Line Catalog |
1-800-662-6099
Catalog - Page 99