Previous Page
 Next Page
Welding Index On-Line Catalog
VENSEL ENTERPRISES
1-800-662-6099
Catalog - Page 111
W059-0001-S 
Bar Solder-(Contains Lead)

•    For armatures, commutators and solder tinning and flowing.
•    Bar Size:  approximately 2 pounds
Part Number Tin% Lead% Silver% Antimony Pot Operating Temp. F.
S504-10-100-10 10 90 0 0 700 to 900 degrees
W059-0853-S 40
60 0 0    550 to 650 degrees
W059-0855-S 60 40 0 
0    500 to 600 degrees

Bar Solder-(Lead Free)
For armatures, commutators and solder tinning and flowing.
Part Number Tin Silver Copper Pot Operating Temp. F.
H504-9703 97
0
3 
700 to 750 degrees
H504-9603 96.5 3.5 0
700 to 750 degrees
_____________________ 
G304-ABR
ARMATURE BRAZING ROD

•    5.8 - 6.2% Silver x 7.0 - 7.5% Phosphorus x Balance Copper
•    For torch welding
•    A highly fluid alloy designed for copper to copper brazing like in heavy duty armatures
•    Available in wire and rod
•    No flux required on copper applications

Physical Properties:   
    Solids    1190 degrees Fahrenheit
    Liquidus    1327 - 1341 degrees Fahrenheit
    Brazing Temperature Range  1275 - 1450 degrees Fahrenheit
    Electric Conductivity 15.1
 W059-0027-S3
W059-0027-S3  
SOLDER RECLAIMER

  • Jar, 3 lb
  • Recover good solder and save money
A304-7770-1
A304-7770-1
HEAT BLOCK

Heat Block is designed to stop the heat transfer that occurs when you are soldering or silver soldering, thus protecting critical parts like diodes, wiring and insulators.

Features:
  • Comes in an easy to use paste form
  • Stop heat transfer before you damage critical parts
  • Stop solder from running up your brush leads
  • Contains no toxic material and is harmless to the sking
  • Leaves no stains or marks
E204-0003-TC
E204-0003-TC
SOLDERING IRON TIP CLEANER

•    A simple stroke across the moistened sponge wipes off the residue which falls into the base tray
•    Center portion is a water reservoir
Previous Page Next Page
Welding Index On-Line Catalog
VENSEL ENTERPRISES
1-800-662-6099
Catalog - Page 111