| Previous Page | Next Page |
| Welding Index | On-Line Catalog |
1-800-662-6099
Catalog - Page 121
A554-0014
ARMATURE DE-SOLDERING STATION
ARMATURE DE-SOLDERING STATION
Arrives ready to use, just connect gas and air
Operation:
1 Place armasture in holding fixture
2 Wait until armature is de-soldered
Features:
• fast localized heating
• low energy consumption
• no solder waste
• double wall insulated base
Specifications:
Burners: 3
Gas: 80000 BTU (natural or propane)
Air: 60-100 psi
Melting time: 10 to 20 seconds
Size: 26” x 26” x 40”
Weight 190 lbs.
ARMATURE WAVE SOLDER MACHINE
Operation:
The armature is simply placed in the holding fixture
which rotates the unit at the proper soldering angle in the wave
The armature is simply placed in the holding fixture
which rotates the unit at the proper soldering angle in the wave
Features:
- Solder pump: Zero maintenance, explosion proof, air motor driven, no bearings in solder, (80 lb-1/2cfm)
- One switch operation. Armature cycles through entire soldering procedure automatically
- Sleeves are available for all types of armatures.
- Our new master fixture will handle truck
and diesel armatures up to 3 1/2 inches
- Main On/Off switch
- Rotating drive motor switch
- Solder fountain heaters On/Off
- Temperature indicating precision thermostat
- 60 second adjustable electric timer
- Oiler, filter, regulator and gauge
- Speed control for solder rotation
ARMATURE
WAVE SOLDER MACHINES
A554-0030-E SINGLE STATION
ELECTRICA554-0030-G SINGLE STATION GAS
A554-0031-E TWO STATION ELECTRIC
A554-0031-G TWO STATION GAS
• Allows fast, consistent soldering
• Exhaust Hood: covers entire tank assembly, built in with 6” exhaust filtering
• Exhaust ducking is not supplied
• Tooling sold separately
Features of A554-0030-E & G
Power: 240V, 1PH, 4000 Watt, 50,000 BTU
Air: 60-100 psi, 1/2 CFM
Size: 26” x 31” x 68”
Shipping weight: 200 lbs.
Features of A554-0031-E & G
Power: 240V, 1PH, 8000 Watt, 100,000 BTU
Air: 60-100 psi, 3/4 CFM
Size: 26” x 41” x 68”
Shipping weight 280 lbs.
BASIC OPERATION OF FLOW SOLDERING MACHINES
1
The proper holding fixture is mounted & the armature is installed
2 The controls are activated & solder is pumped up to the commutator face through the tooling directly to the rizer cover all 360 degrees of the armature
3 The solder flows over the fixture and back into the pot.
2 The controls are activated & solder is pumped up to the commutator face through the tooling directly to the rizer cover all 360 degrees of the armature
3 The solder flows over the fixture and back into the pot.
| Previous Page | Next Page |
| Welding Index | On-Line Catalog |
1-800-662-6099
Catalog - Page 121