| Previous Page |
Next Page |
| Winding Index | On-Line
Catalog |
1-800-662-6099
Catalog - Page 147
M105-0040
MANUAL ARMATURE WINDER
MANUAL ARMATURE WINDER
• Allows winding, by hand of either straight or skewed lamination stacks
• Handles armatures up to 6” OD & 8” lamination length
• Supplied with counter
 |
 |
M155-0002
SEMI-AUTOMATIC FIELD COIL WINDER
SEMI-AUTOMATIC FIELD COIL WINDER
• Winds any flat wire automotive coils from 3/4” x 1 1/2” to 7” x 7”
• Winds both right or left handed coils
• Tooling sold separately
Production rate: up to 150 separate coils per hour
Tooling change time: 5 minutes
Power: 3/4 HP, 220/440V, 3 Phase, 60Hz
Air: 150 lbs. clean dry air
Size: 85”H x 63”W x 56”D
Options:
M155-0002-HDL Hydraulic Wire Reel Lift-LH
M155-0002-HDR Hydraulic Wire Reel Lift-RH
M155-0002-PW Pressure Wheel
M155-0002-WB Winding Block
M155-0002-WFL Wire Forming Attachment-LH
M155-0002-WFR Wire Forming Attachment-RH
HEAVY
DUTY WINDERS AVAILABLE FOR TRACTION MOTOR WINDING
C755-2375
Field Coil Wrapping Machine (with one set of tooling)
(wrap 20 to 30 coils per hour)
Field Coil Wrapping Machine (with one set of tooling)
(wrap 20 to 30 coils per hour)
• Variable Speed 0-580 RPM, Foot Switch controlled
• Acceleration/Deceleration rate adjustable from 0-100%
• Motor Control: 3 Position toggle switch, Forward/Off/Reverse
• Choose your Tape Width Head: 3/8”...10MM or 1/2...13MM
• Wrapping Dimensions: 7/8” Throat opening, 3” Shuttle opening,
• Call with or send your coil dimensions for the correct tape width tooling
• Electrical Power: 1/2 HP AC Motor with DC controller, 120/240 Volt, 50/60 Hz, 6’ grounded US Cord.
• Foot Print: 16" x 18" x 10" Tall
• Shipping Weight: 120 pounds
Tooling Options:
C755-2375-1/2T Complete Tooling 1/2”
C755-2375-3/8T Complete Tooling 3/8”
| revious Page | Next Page |
| Winding Index | On-Line Catalog |
1-800-662-6099
Catalog - Page 147