| Next Page |
|
| Cleaning Index | On-Line
Catalog |
1-800-662-6099
Catalog - Page 151
STEEL SHOT
S306-0110 EXTRA FINE
S306-0170 FINE
S306-0230 COARSE
• Minimum: 50 lbs,
• Most widely used for both aluminum and steel
• Cut fast
• Edges not as sharp as steel grit
• Steel grit blends well with steel shot
• Many users blend coarse and fine steel shot to get their desired finish
• We recommend coarse steel shot
Scrap charge applies.
STEEL
GRIT
S306-0001 EXTRA FINE
S306-0002 FINE
S306-0003 COARSE
• Minimum: 50 lbs
• Leaves a smoother finish than steel shot
• Cuts fast due to sharp edges
• Could be blended with steel shot depending on desired finish
• We recommend the coarser grades
STAINLESS
STEEL SHOT
S306-0010
EXTRA FINES306-0011 FINE
S306-0012 COARSE
• Minimum: 50 lbs
• Works great on aluminum and cast iron parts
• Gives a “Like New” appearance to aluminum
• Less dust than steel shot
• Costs more but lasts longer
P106-0030-PZ
CUT WIRE ZINC
CUT WIRE ZINC
• Minimum: 50 lbs
• Longer work life than steel shot
• Produces a satin like finish on aluminum
• Can be blended with steel shot
• Size: 0.030 x 0.030
ALUMINUM
OXIDE
S306-0004 EXTRA FINE
S306-0005 FINE
S306-0006 COARSE
• Minimum: 50 lbs
• Longer lasting and more aggressive than glass beads
• Expect a shorter life on all parts in the system
• Works good when blended with glass beads
• We recommend using the coarser grades
Saves Wear and Tear & Saves Money
Aluminum Blasting Media
Use in Steel Shot & Glass Bead Blasters
Comparison results in Blasting Cycle Life....(How long it
will last.)
Glass Beads, Plastic Media Less than 50 cycles
Steel Shot 3,250 cycles
Stainless Steel 4,200 cycles
Aluminum Media-T206-1200-RSA 8,000 cycles
Glass Beads, Plastic Media Less than 50 cycles
Steel Shot 3,250 cycles
Stainless Steel 4,200 cycles
Aluminum Media-T206-1200-RSA 8,000 cycles
Benefits
in Steel Shot Blasters:
• far less dust (almost none)
• less noise
• far less wear on ALL PARTS
• produces a satin-like finish
• far less dirty finger prints
• 2 times longer working life
• does not damage threads
• no scrap or surcharge
• motor draws fewer amps
• can be mixed with steel shot
Benefits in Glass Bead Blasters:
• far less dust (almost none)
• longer glass life
• far less wear on gun and nozzle
• produces a satin-like finish
• far less dirty finger prints
• good for over 8000 cycles
• does not damage threads
• gloves last much longer
Other Important Facts:
1 T206-1200-RSA will require more blasting time in your Steel Shot Blaster
2 A 5/16 Blasting Nozzle is required for Glass Bead Blasters
3 When cleaning PM Field Cases, you can use aluminum media once all the steel shot is out of your machine and it’s a good idea to keep magnets in a plastic zip lock bag attached to the side of your machine to pick up any steel particles as they are removed .
• far less dust (almost none)
• less noise
• far less wear on ALL PARTS
• produces a satin-like finish
• far less dirty finger prints
• 2 times longer working life
• does not damage threads
• no scrap or surcharge
• motor draws fewer amps
• can be mixed with steel shot
Benefits in Glass Bead Blasters:
• far less dust (almost none)
• longer glass life
• far less wear on gun and nozzle
• produces a satin-like finish
• far less dirty finger prints
• good for over 8000 cycles
• does not damage threads
• gloves last much longer
Other Important Facts:
1 T206-1200-RSA will require more blasting time in your Steel Shot Blaster
2 A 5/16 Blasting Nozzle is required for Glass Bead Blasters
3 When cleaning PM Field Cases, you can use aluminum media once all the steel shot is out of your machine and it’s a good idea to keep magnets in a plastic zip lock bag attached to the side of your machine to pick up any steel particles as they are removed .
| Next Page | |
| Cleaning Index | On-Line Catalog |
1-800-662-6099
Catalog - Page 151