| Previous Page |
Next Page |
| Lathe Index | On-Line
Catalog |
1-800-662-6099
Catalog - Page 201
S407-OMPS
ROTATING STAND ONLY
ROTATING STAND ONLY
• Made in the USA
• All steel construction
• Table top mounted, table not supplied
• Rotates the rotor or armature at 0 to 250 RPM
• Supplied with 1/2HP totally enclosed 110V, 60Hz motor & gear box combination
• Comes with 3” Three Jaw Chuck, Tail stock has a nylon bushing dead center which allows live center movement. 1 male & 1 female supplied
• This machine is not designed to replace a lathe. With it’s accuracy of one thousand or less it is for polishing and micro finishing applications
• Table top size: 16”W x 49”D x 12”H
• Distance between centers: 25 1/2” and can be varied per your requirements
Replacement Parts:
S407-4218-KT 1/2HP, 110V, 250 RPM Motor & Gear Box
S407-1510-TS 1” Dead Nose Center Male
S407-1512-TS 1” Inverted Dead Center Female
S407-1500-BU Bushing for Centers
Options:
S407-OPWA Polishing Attachment
S407-OPAS Sanding Attachment
Can be mounted behind S407-OMPS Rotating Stand separately or in combination depending on your application
S407-OPAS
SANDING/ABRASIVE BELT ATTACHMENT OR
MICRO FINISHING/POLISHING WITH OPTIONAL ROLLER KIT
SANDING/ABRASIVE BELT ATTACHMENT OR
MICRO FINISHING/POLISHING WITH OPTIONAL ROLLER KIT
• Made in the USA
• All steel construction
• Designed to be used with an existing lathe or rotating stand, simply mount on back
• For shafts, commutators and slip rings on alternators
• Use 1” X 60” Abrasive/Sanding Belts for sanding
• Order an additional roller kit and polish also
• Supplied with variable speed motor control, with motor off push button on handle, driven by 8 amp totally enclosed, CW or CCW motor.
• Mounting size 52”W X 19”D X 31”H
• Can be operated with either left or right hand, so a combination of attachment can be used on the same Thompson Rail
• Shipped Weight: 50 lbs., Shipped in two boxes
Options:
S407-0072-RSKT High Side Flanged Roller Kit
• For small width 1/2” to 1” X 60” Micro Finishing/Polishing Belts
Service Parts:
S407-0072-MREAKT Unflanged Roller Kit for 5/8” to 1” x 60” Belts
S407-0072-MREKT Unflanged Roller Kit for 1” to 1 1/2” x 60” Belts
S407-1680 1” x 60”, 80 Grit Abrasive/Sanding Belt
S407-16120 1” x 60”, 120 Grit Abrasvie/Sanding Belt
S407-16220 1” x 60”, 220 Grit Abrasive/Sanding Belt
S407-16320 1” x 60”, 320 Grit Abrasive/Sanding Belt
S407-0160-V 1” X 60”, Very Fine Grade Micro Finishing/Polishing Belt
S407-4275-KT Motor
| Previous Page | Next Page |
| Lathe Index | On-Line Catalog |
1-800-662-6099
Catalog - Page 201