Previous Page
Lathe Index On-Line Catalog
VENSEL ENTERPRISES
1-800-662-6099
Catalog - Page 216
M157-0086
M157-0086
PRODUCTION STARTER FIELD CASE BRUSHING MACHINE

Features:
  • Internal Expanding Mandrel with replaceable jaws.  Holds the field case tightly in place while it rotates at a slow RPM
  • Handle Bar Controlled Wire Brushing Arm mounted to Thompson Rods for back and forth movement across the rotating field case.
  • Automatic Motor Control activated by the handles movement up and down.
Power Requirements:
Air:  Clean dry shop air, 60 psi minimum to 80 psi maximum
Power:  220V, 1PH, 60 Hz
Floor Space:  3’ 4” wide x 3’ 6” deep X 6’ tall
Shipping weight:  425 lbs
M157-0128p216
M157-0128
STATOR ID SANDER

•    Can be used with sanding bands or wire brushes
•    Suppled with mandrel & 12 sanding bands
•    Power:  110/220V, 1PH, 60Hz
•    Other models available

Operation:
1    Place the stator over the mandrel
2    Hold in the stator by its outside edge
3    Rotate it around the mandrel
M157-0302p216
M157-0302
COMBINATION STATOR ID & OD SANDER/BRUSHER

Operation:
ID Sanding:
  1. Mount stator over mandrel
  2. Rotate
OD Sanding:
  1. Press against idler wheel
  2. Rotate
Features:
•    Two separately controlled 1/2 HP motors
•    Supplied with safety shields on top and sides
•    Power:  110/220V, 60Hz, 1PH
•    Production time:  less than 20 seconds for both ID & OD

Options: 
M157-0302-DC Dust Collector
Previous Page
Lathe Index On-Line Catalog
VENSEL ENTERPRISES
1-800-662-6099
Catalog - Page 216