| Previous Page |
Next Page |
| Tools Index | On-Line
Catalog |
1-800-662-6099
Catalog - Page 224
ACCESSORIES
FOR D158-4035-102 JIFFY BALL BEARING PULLER
EXTENDED BEARING PULLING PLATES
EXTENDED BEARING PULLING PLATES
D158-4035-4
• Extended puller plate for 6202 bearings, OD 1.378, 35mm
• Used on ALT SRE...numerous domestic, CS130D and Import Internal Fan
• Supplied with D158-4035-325 Push Rod
D158-4035-5
• Extended puller plate for 6303 bearings, OD 1.850, 47mm
• Used on ALT DE...CHR 100/114, CS121, CS130, CS130D, CS144
• Supplied with D158-4035-2.5 Push Rod
D158-4035-7
• Extended puller plate for 6203 bearings, OD 1.575, 40mm
• Used on ALT...DE, domestic & import
• Supplied with D158-4035-376 Push Rod
INNER
RACE PULLER PLATES
D158-4035-9A Puller plate for inner race off the SRE frame on CS144
D158-4035-11 Puller Plate for inner race of 6000 bearings
D158-4035-6000R Pulls inner race on
6000
bearings
(This puller works in conjunction with a D158-4035-2 Plate, purchased separately)
D158-4035-6201R Pulls inner race on 6201 bearings
(This puller works in conjunction with a D158-4035-4 Plate, purchased separately)
D158-4035-6202R Pulls inner race on 6202 bearings
(This puller works in conjunction with a D158-4035-4 Plate, purchased separately)
D158-4035-6203R Pulls inner race on 6203 bearings
(This puller works in conjunction with a D158-4035-7 Plate, purchased separately)
D158-4035-6303R Puller inner race on 6303 bearings
(This puller works in conjunction with a D158-4035-5 Plate, purchased separately)
(This puller works in conjunction with a D158-4035-2 Plate, purchased separately)
D158-4035-6201R Pulls inner race on 6201 bearings
(This puller works in conjunction with a D158-4035-4 Plate, purchased separately)
D158-4035-6202R Pulls inner race on 6202 bearings
(This puller works in conjunction with a D158-4035-4 Plate, purchased separately)
D158-4035-6203R Pulls inner race on 6203 bearings
(This puller works in conjunction with a D158-4035-7 Plate, purchased separately)
D158-4035-6303R Puller inner race on 6303 bearings
(This puller works in conjunction with a D158-4035-5 Plate, purchased separately)
C758-0102
SLIP RING PULLER
SLIP RING PULLER
1 Includes on set of tooling/jaws
2 Choose tooling/jaws below
Tooling/Jaws:
C758-0102-T1 Jaws for 1/4” to 1”
C758-0102-T2 Jaws for 1/2” to 5/8”
D158-4035-50 5C
COLLET PULLER PLATE
• Used on alternators & starters
• Pulls by grabbing the OD of the bearing
• Pulls bearings with OD up to 26mm, (1.024)
• Also widely used to pull alternator slip rings
• Supplied with push rods and plate spacer
Operation:
1 Select 5C Collet and install in holder
2 Insert rotor
3 Tighten handle on 5C Collet Puller Plate
4 Pull handle on D158-4035-102 Jiffy Ball Bearing Puller to remove bearing
| Previous Page | Next Page |
| Tools Index | On-Line Catalog |
1-800-662-6099
Catalog - Page 224