| Previous Page |
Next Page |
| Tools Index | On-Line
Catalog |
1-800-662-6099
Catalog - Page 235
Blind Hole Bushing and Bearing Puller
•
One kit with pulling ranges from 5/16” (8mm) to 1 1/4” (32mm)
• Slide hammer operated
• Supplied in a heavy duty storage and carrying case.
• Kit Includes: 8 pullers and 1 slide hammer
• Slide hammer operated
• Supplied in a heavy duty storage and carrying case.
• Kit Includes: 8 pullers and 1 slide hammer
| Puller Ranges |
| 5/16” to 13/32”, (8 to 10mm) |
| 13/32” to 15/32”, (10 to 12mm) |
| 15/32” to 9/16”, (12 to 14mm) |
| 19/32” to 11/16”, (15 to 17mm) |
| 11/16” to 25/32”, (17 to 20mm) |
| 25/32” to 15/16”, (20 to 24mm) |
| 1” to 1 1/8”, (25 to 29mm) |
| 1 3/16” to 1 1/4”, (30 to 32mm) |
 |
 |
 |
REAMERS
A158-0530 Delco Starter Glind Nose Cut Off Tool
A158-0105 Clearance Hole on Pulley End of Housing with 203 Bearings, like Chrysler
A158-1500-1 Drive End Reamer - for Delco & Ford .002 undersize
A158-1500-2 Drive End Reamer - for Delco & Ford standard
A158-1500-3 Drive End Reamer - for Delco 7 Ford .002 oversize
A158-1500-4 Delco Reamer - generator commutator end standard
A158-1500-5 Commutator End Reamer - for Ford
A158-1500-6 Chrysler Back Plate Reamer - standard
A158-1500-C Chrysler Gear Reduction Alignment Reamer
 |
 |
A158-1562-2 40MT Oversize Reamer - 7/8”
A158-1544-22
Reamer for Delco & Ford passember Car Aluminum Housings
• Pilot OD.468, Body OD .592
Reamer for Delco & Ford passember Car Aluminum Housings
• For use with Rebuilders Supply of Atlanta Boring Fixture & Ace 4422 Bushing
A158-1544-56
Extra Large OD Reamer
• For industrial drive housing, Fork lift, tractors
et. Extra Large OD Reamer
• Used with Rebuilder Supply’s Boring Fixture & Ace 4381 Bushing
A158-1560-1 40MT Commutator End Reamer
| Previous Page | Next Page |
| Tools Index | On-Line Catalog |
1-800-662-6099
Catalog - Page 235