| Previous Page |
Next Page |
| Tools Index | On-Line
Catalog |
1-800-662-6099
Catalog - Page 272
 |
 |
A158-2504
REMOVE & INSTALL SNAP RING KIT
REMOVE & INSTALL SNAP RING KIT
To displace & remove snap ring:
1 Tooling is designed to be bolted to your work bench
2 The holes in the back of the base tooling will displace the collar from the top of the snap ring
3 The slots on the front of the base tooling will strip the snap ring out of it’s groove by pulling it down/striping the snap ring off the shaft
To install & seat snap ring:
1 Put bullet over the end of the shaft
2 Put snap ring on the bullet
3 Take seating sleeve and push snap ring into the groove
4 Then by lifting the drive up and tapping on the seating sleeve you would insert the snap ring into the lock cup
Kit contains:
• A158-2504-UB Universal Base
• All Five snap ring installers and lock cup seating sleeves, A158-2504-2 through A158-2504-6
| Options: | |||
| Application
|
Size |
Base # |
Installer & Seating Sleeve # |
| Volkswagen | .375 to .435, 9.52mm to 11.04mm | A158-2504-2B | A158-2504-2 |
| Delco 5
& 10MT, Some Gear Reductions |
.420 to .480, 10.66mm to 12.19mm | A158-2504-3B | A158-2504-3 |
| Delco Industrial, 10 to 35MT | .455 to .515, 11.55mm to 13.08mm | A158-2504-4B | A158-2504-4 |
| Bosch
Datsun Other Foreign applications |
.520 to .580, 13.20mm to 14.73mm | A158-2504-5B | A158-2504-5 |
| Bosch,
Lucas, Nippondenso Mitsubishi Industrial |
.625 to .685, 15.87mm to 17.39mm | A158-2504-6B | A158-2504-6 |
Note:
Bases & Installer/Seating Sleeves can be purchase separately.
 |
 |
 |
A018-1151-E
FORD SNAP RING INSTALLING & REMOVING TOOL
| Previous Page | Next Page |
| Tools Index | On-Line Catalog |
1-800-662-6099
Catalog - Page 272