Previous Page
Next Page
Tools Index On-Line Catalog
VENSEL ENTERPRISES
1-800-662-6099
Catalog - Page 273
C708-Kit
C708-Step 1
C708-Step2

SNAP RING EXPANDERS



C708-ML15    

Covers snap ring grooves approx 0.0629” or 1.6MM
to 0.0708 or 1.8MM wide.

C708-ML47R    
Covers snap ring grooves approx. 0.0787” or 2MM
to 0.9444 or 2.4MM wide.

SNAP RING REMOVER:
C708-0490    
Brush Hook

Operation:
•    Put on Safety Goggles
•    Mount the drive in a vice or like holding fixture
•    Expose the snap ring so that it is completely exposed
•    Place the serrated tip into the opening in the snap ring , with the expander parallel to the shaft as show to         the left.
•    Slightly Clamp the handles, opening the snap ring just until the Brush Hook will go inside the snap ring,         approx. 0.0415” or 1.5MM
•    Cover the snap ring with a shop towel to prevent the snap ring from causing any body damage
•    Slightly pry up on the brush hook and the snap ring is easily removed with the least amount of distortion.
•    No Warranty expressed or implied due to possible abuse
Previous Page Next Page
Tools Index On-Line Catalog
VENSEL ENTERPRISES
1-800-662-6099
Catalog - Page 273