| Previous Page |
Next Page |
| Tools Index | On-Line
Catalog |
1-800-662-6099
Catalog - Page 280
A554-0015
CROSS FIRE STATOR REMOVER
(For Press in Stators)
CROSS FIRE STATOR REMOVER
(For Press in Stators)
This
unique machine heats up the aluminum housing
that the stator is pressed into.
This causes the housing to expand allowing the stator to fall out.
The stator is ejected down a side chute.
Outstanding
Features:that the stator is pressed into.
This causes the housing to expand allowing the stator to fall out.
The stator is ejected down a side chute.
• Cycle time approximately 5 seconds
• Stator drops into a shoot and comes out on the side
• Tooling required and sold separately
Tooling:
A554-0015-A Tooling per Stator, samples may be required
Power required:
Natural gas @ 4” to 6” water column
or
LP Gas @ 11” water column
Clean dry shop air @ 3 to 5 Cu. Ft. per minute, 40 lbs. maximum adjustable at machine
Size: 38”H x 18”W x 16”D
Shipping Weight: 150 lbs., machine only
Options:
A554-0015-C Electronic Ignition, 110V, 60 Hz
A554-0015-D Three sided hood - fan & ducking not included
A554-0015-E Safety Control - depending on local regulations
A554-0015-F Tooling to preheat the housing for stator installation
| Previous Page | Next Page |
| Tools Index | On-Line Catalog |
1-800-662-6099
Catalog - Page 280